The Heating system
The system of ideal solar water heaters in Kenya is basically made up of the Tank and the Collectors. The Tank is comprised of the inner and outer layers, separated by a highly-effective, heat-insulating material; this ensures that all hot water in the tank stays hot for a long period of time. The Collectors are high-efficiency vacuum tubes, whose inner layer traps heat from the sun via a triple-absorption coating. The absorption coating in turn transfers heat to the water. This heat is prevented from escaping by a vacuum in between the double-layer coaxial glass structure of the tube – making the complete system highly efficient.Hot water in the tank is kept hot thanks to the highly-effective, heat-insulating material between the inner and outer layers of the tank; this ensures that all hot water in the tank stays hot for a long period of time. Depending on your usage pattern, you will be able to set the solar water heaters in Kenya system to automatically boost the temperature of the water, should the need arise
INTEGRATE HEATPIPE PRESSURIZED SYSTEN
SPECIFICATION
- Solar Collector
Vacuum Tube Type:Three Target Vacuum Tube(Cu -S/S-AU Nl,58mm” 1800mm size. Tube Material:1.6mm thickness borosilicate 3.3
Hail Resistance:25mm
- Water Tank Diameter:455mm
Inner tank material:0.31 mm-0.Smm thickness SUS 304 food grade stainless steel Outer tank material:0.31 mm-0.Smm thickness galvanized steel
- Insulation Layer Material
High density polyurethane foaming(Germany),50mm thickness.42kg/m3 Bracket
Material:1.5mm thickness galvanized steel,Angle:27°
- Heat Preservation:72-80
- Absorption Rate: 93% ; Heat radiation rate:s6% (100”C ). (different country might different)
INTEGRATE FLAT PANEL PRESSURIZED SYSTEM
SPECIFICATION
- Solar Panel
All copper,blue chrome selective coating.
- Water Tank Diameter:470mm
lnnner Tank:1.2mm SUS316
Outer Tank:0.€1 mm thickness galvanized steel/SUS30ñ stainless
- Insulation Layer Material
High density polyurethane foaming(Germany),50mm thickness,ñ2kg/m3. Max Working Pressure:0.6Mpa
- Bracket
Material:1.5mm thickness galvanized/stainless avaliable
- Daily efficiency:›55%(›ñ2% in winter)
- Heatpipe preservation:72-80hours
SOLAR COLLECTOR FOR PROJECTV
- Solar collector: Three layer coating (Cu-S/S-AL/ N) vacuum tube, 58*1800mm size.
- Inner manifold: Food grade stainless steel, SUS304-2B, 0.40mm thickness.
- Outer manifold: Silver drawing board, 0.40mm
- Water tank insulation: High-density polyurethane foaming, 45mm thickness.
- Frame: Painted galvanized steel, 1.5mm thickness (Stainless steel is available].
- Frame angle: 35°.
- Heat preservation: 72-80
- Absorption rate: »93%; Heat radiation rate: s6% (100“C ) .
- 3 years warranty and 15 years
SPIIT PRESSURIZED HEAT PIPE SOLAR WATER HEATER
- Solar collector; Three-layer coating heat pipe,58*1800mm size.
- Manifold.Aluminium alloy out casing and red copper flow passage,2.0mm thickness.
- Frame; Aluminium alloy out, 2.5mm thickness.
- Frame angle: 27°-50°is
- Inner water tank: Food grade stainless steel, SUS304-2B, 0mm thickness.
- Outer water tank: Stainless ceramic plate, 50mm thickness. [Looks like new after 5 years use).
- Water tank insulation: High-density polyurethane foaming, 50mm thickness (55mm, 60mm thickness is available].
- Copper coil: p12mm”1.0mm.
- Work station: Include expansion case, Check valve, Pressure relief valve, Circulation pump, Intelligent controller, temperature
- 3 years warranty and 15 years lifetime.